How to Hang a Plug-In Pendant Light With a Bamboo Shade (No Wiring)
How to hang a bamboo pendant light from a ceiling hook on a plug-in cord set, with what to buy, how to measure the cord route and the six steps.

You have a woven bamboo shade, or you're about to buy one, and no ceiling fitting where you want the light. Maybe you rent, or maybe you'd rather not pay an electrician to add one. Either way, the house wiring can stay as it is. The shade hangs from a plug-in cord set, the cord loops over a ceiling hook, and the plug goes into an ordinary wall socket (an outlet, if you're in the US).
Two things are worth settling before you spend anything. The first is what arrives in the box. Our shades come with their hanging hardware, but the cord set (with its bulb holder) and the bulb are sold separately, and the ceiling hook is something you buy yourself. The second is whether the cord will reach. That one measurement decides whether the rest of the job works, so this guide does it before any buying or drilling.
This is the plug-in method only; if you have a ceiling fitting and want the shade wired in by an electrician, our hardwired bamboo pendant install guide covers that route instead.
What you need (and what comes with the shade)
A plug-in cord set is one length of cable with a bulb holder at one end, a plug at the other and an on and off switch partway along (an inline switch). A ceiling-rose set is a different thing: it connects to the wiring at a ceiling fitting, so it has to be wired in, and this guide doesn't use one.
| Item | Comes with the shade? | Notes |
|---|---|---|
| Bamboo shade and its hanging hardware | Yes, the hardware is included | Still choosing a shade? Browse our bamboo pendant lights. |
| Plug-in cord set | No, sold separately | Cable, bulb holder, plug and inline switch. Our plug-in pendant light kits come with a 1.8 m or a 2.5 m cord. |
| One E26 or E27 bulb | No, sold separately | Each of our kits takes one bulb. |
| Ceiling hook | No, and we don't sell one | Choose one suitable for the combined weight of the shade, cord set and bulb, with fixings that suit your ceiling. |
| Cord ties | No, sold separately | They fix the cord along the ceiling and down the wall, and the first one, beside the hook, fixes the cord once the height is set. They hold the cord, never the shade. Our Gina Brass Cable Tie Set holds cord up to 7 mm and comes six per pack; find it with our other lighting accessories. |
| Tools | No | Stepladder, tape measure, pencil, and a drill or screwdriver for the hook. |
E26 and E27 are screw-in bulb bases, and our kits take either. Before you order, check the fitting listed on your shade's product page (most of our shades list E27), so you know it suits the cord set's bulb holder. For bulb type and wattage, go by what the cord set's instructions or listing allow.

Choose the cord set for your country
The plug has to match your wall socket. Our white plug-in pendant kit with switch is listed in four plug variants, each with a 1.8 m cord and an inline rocker switch:
- US: US Type A
- UK: UK Type G
- Europe: EU Type C
- Australia: AU Type I
The Black Plug-In Pendant Light Kit with Switch (2.5 Metres) gives you a longer cord but is listed with a US Type A plug only, so readers in the UK, Europe and Australia should choose the matching variant of the white kit. There's also a black version of the white kit; check its listing for the plug you need.
The white kit's listing says no electrician is required and no hardwiring is needed. That covers the electrics only; the ceiling hook still has to be fixed properly, and step 1 deals with it.
By now you should have a shopping list: the shade, a cord set with the right plug, one bulb, a ceiling hook and cord ties. Hold off ordering the cord set until you've measured, because the route decides which cord length you need, or whether the plan works from that wall socket at all.
Measure the cord route before you buy
This guide hangs the shade as a swag. The cord loops over a ceiling hook above the spot you want to light, runs across the ceiling and down the wall to the wall socket, and the shade hangs from the hook on the rest of the cord. So the cord has to cover three lengths, not one:
- From the wall socket up the wall to the ceiling.
- Across the ceiling to where the hook will go.
- From the hook down to the height you want the shade.
Measure the climb up the wall first. It's the one length you can't shorten by moving the hook, so if the climb alone comes close to the length of the cord, that wall socket won't work wherever the hook goes.
Then add the three together and compare the total with the 1.8 m or 2.5 m cord. You want the cord longer than your total, with slack to spare, so it isn't pulled tight at the plug or at the hook.
Picture a wall socket low on one wall and a reading chair a few steps into the room. The floor distance looks short, but the cord has to climb almost the full height of the wall, cross the ceiling to a hook above the chair and come back down to the shade. Measure each length with the tape rather than judging it by eye.
The measurement also tells you where the hook can go. A good hang point is close enough to a wall socket for the cord to reach, far enough from the walls for the shade to hang freely, and below something solid you can fix the hook into, such as a ceiling joist.
If the total comes out longer than the cord, shorten what you can: move the hang point closer to the wall socket so the run across the ceiling is shorter, or plan to hang the shade a little higher. If the climb leaves too little cord for the rest, moving the hook won't fix it. Look for a wall socket set higher on a wall, or, in the US, use the 2.5 m black kit, which gives you more reach than the 1.8 m white kit.
Once the total is shorter than the cord with slack left over, order.

How to hang a plug-in pendant light, step by step
Follow the six steps in this order. The shade is fitted on the ground, not at the top of the ladder.
1. Fix the ceiling hook into something solid
Before you drill: the hook carries the whole light, so use one suitable for the combined weight of the shade, the cord set and the bulb, and fix it into a joist or something equally solid. If you rent, check you're allowed to put a hook in the ceiling. If you're not sure what's above the ceiling at that spot, ask a qualified electrician or a handyperson before drilling.
Mark the spot you chose when measuring, then fit the hook following the instructions that came with it.
Pull down firmly on the hook. It shouldn't move at all. If it shifts, don't hang anything from it; refit it into something solid first.
2. Fit the shade to the cord set on the ground
Lay the shade and the cord set on a table or a clean floor, and attach the shade to the cord set the way the cord set's instructions describe.
There's a reason to do this at table height. Every product we sell is handmade in Thailand, and handmade shades differ a little from one to the next in size and shape. A fit problem is easier to spot and sort out on the ground than on a ladder with your arms over your head.
Hold the cord set up by the cable and let the shade hang. It should sit level. If it tilts, take it off and refit it.
If the shade and the bulb holder don't fit together, stop there. Don't force them or improvise a fix. Check the fitting listed on the shade's product page against the cord set.
The video below shows a bamboo pendant being fitted to a cord.
3. Fit the bulb
Screw one E26 or E27 bulb into the bulb holder, choosing a bulb type and wattage the cord set's instructions or listing allow.
Look through the weave from a few angles. The bulb should not touch the shade anywhere. If it does, take the shade off and recheck the fit from step 2 before going any further.
4. Hang the shade and set the height
To hang a pendant light with a cord, loop the cord over the ceiling hook so the shade hangs below it, and keep hold of the cord on the wall side of the hook. This part is easier with two people: one on the ladder holding the cord, the other where the light will be used, at the table, in the chair or where people walk past.

Feed the cord over the hook until the height looks right from that spot. The shade should hang level, clear of the walls and clear of anyone's head.
Still holding the cord, fit the first cord tie to the ceiling just past the hook, on the side heading towards the wall socket, to keep the cord from slipping back over the hook and changing the drop. Let the cord curve over the hook rather than folding into a tight kink.
The hook carries the weight of the light; the ties only keep the cord in place. If you use our Gina Brass Cable Tie Set, it fixes with adhesive, which the listing describes as for lightweight use, or with screws and anchors. If you're not sure adhesive will hold on your ceiling, use the screws. If your cord set's instructions describe how to hold the drop, follow them.
Let go of the cord. The shade should stay at the height you set. If it slips, refit that tie before you go on.
5. Run the cord down to the wall socket
Carry on from that first tie. Run the cord across the ceiling and down the wall to the wall socket, fixing it with cord ties as you go. Keep it out of walkways so nobody can catch a foot or an arm in it, and leave a little slack at the plug so nothing pulls on it. Plug in, and don't overload the wall socket.
6. Switch on and check
Switch on with the inline switch, then run through the whole job:
- The bulb lights from the inline switch.
- The shade hangs level at the height you chose.
- The bulb touches the shade nowhere.
- The cord is secure along its route, out of walkways, with no strain at the plug.
- The hook hasn't shifted.
If the bulb doesn't light, check the wall socket is switched on, if it has its own switch. Then unplug the cord set, check the bulb is screwed fully into the bulb holder and try again. If it still won't light, leave it unplugged and ask a qualified electrician.
Looking after it once it's up
Before you dust the shade or move it, switch off and unplug the cord set. Each time, check that the hook is still firm and that the cord hasn't kinked or rubbed where it passes over the hook. For the shade itself, see our guide to caring for bamboo and rattan.
Questions people ask
Can you put a plug on a pendant light?
For a shade you're hanging from scratch, the simple route is a plug-in cord set, which has the plug already fitted. Changing a light that is already hardwired is a job for a qualified electrician, and this guide doesn't cover it.
Do I need an electrician to hang a plug-in pendant light?
The listing for our white plug-in pendant kit says no electrician is required and no hardwiring is needed; the cord set plugs into a wall socket. The part that still needs care is fixing the ceiling hook into something solid. If you're unsure about that, or about what's above your ceiling, ask a qualified electrician or a handyperson.
Which bulb does a bamboo pendant need?
A bamboo pendant on one of our plug-in kits takes one E26 or E27 bulb, sold separately from both the shade and the cord set. Most of our shades list an E27 fitting, but check your shade's product page, and use a bulb type and wattage the cord set's instructions or listing allow.
Can I use a plug-in pendant outdoors?
No. Our plug-in pendant kits are listed for indoor use only, so a pendant on one of them belongs inside.



